สร้างเว็บEngine by iGetWeb.com
Cart รายการสินค้า (0)

Tension Control

Cygnus®

Closed Loop Control; small, powerful and feature-rich
C
ompact yet powerful, the Cygnus® is a dramatically different tension control with advanced features that are easy to use.

Operators can easily navigate through advanced tension control functions and codes using on-screen prompts displayed in full text, making the setup process faster. Web tension is maintained or adjusted using multifunction "smart keys", similar to those used in ATM's, and a large backlit display for easy viewing.

The standard DIN panel mount Cygnus saves valuable panel space with it's compact packaging.  At less than four inches in depth, Cygnus door mount applications leave plenty of space to mount components on the panel immediately underneath.  For retrofit applications there is an IP65 enclosed version allowing for convenient mounting to the machine frame or wall.

"The Cygnus tension control system has decreased our waste from 15% to just over 3.5%. Considering most of our jobs are short runs this is nice savings."

Tom Rouze - Printing Director / Astor Chocolates

Converters and printers can dramatically reduce setup time and improve consistency with powerful features like automatic tuning and out of round roll compensation (previously only possible with a dancer control). Complex tension settings can be input quickly with full text prompts as opposed to more complicated input procedures of the past.
The operator is quickly guided through the setup process and fine tune adjustments, without extensive training or the need of constantly referencing a separate manual.


Additional General Specifications:
Power Amplifiers:
PS-90 and PS-24 power amplifiers may be used to operate 90 or 24 VDC magnetic particle clutches and brakes.
Enclosure:
Cygnus-DIN
IP65 (IEC529)
IP20 (IEC29)
Cygnus-E
IP65 (IEC529)

*Please note-Cygnus replaces the DIGITRAC2 and the EZ-Trac


Features:

  • Web Break Detection
  • Out-of-Round Roll Compensation
  • Bus Communication Capability
  • Auto Tuning
  • Weightless Load Cell Calibration
  • Advanced Load Cell Diagnostics
  • Gain Scheduling

VERSATEC™ versatile tension controllers
 

A multi-function automatic tension or process controller
C
ontrolling your web tension doesn't get easier than this!  The VERSATEC Versatile Tension Control is a
multi-function automatic tension or process controller that uses the US-2 Ultrasonic Sensor to measure distance and roll diameter. It has selectable operating modes for Unwind, Rewind, Dancer, Free Loop, or Ranging applications. 
This flexibility eliminates the need to learn the operation of different controls for different tension zones. The VERSATEC does it all.

The VERSATEC keypad and display provide an intuitive, user friendly operator interface in any operating mode. The control is versatile and powerful, yet very easy to set up and operate. All setup and operating screens are indicated directly on the multi-line alphanumeric menu driven display in real words, not codes, with the corresponding values or status. From the keypad and display, you can control all operating parameters for any operating mode, including tension, distance, dancer position, loop position, alarm set points, security, language and units, and setup selection.

US-2 Ultrasonic Tension Control Applications:  By utilizing the US-2 Ultrasonic Tension Control unit with the VERSATEC control, you can have accurate control by measuring the diameter of the roll. This fully automated ultrasonic tension control system allows your core and full roll alarms to be adjusted to give your operator a signal before reaching the end of the roll. This allows you to reduce scrap by utilizing the entire roll on your web.

Click here to see examples of how VERSATEC fits into a tension control
application
GO>>



Key Features:

  • Unwind, Rewind, Dancer, Free Loop and Ranger Control all in one package
  • Stores four setups for quick, precise changeovers
  • Language selectable in English, French, German, Italian or Spanish
  • Selectable inch or metric units of measurement
  • 4-20MA, 0 to 10VDC, -10 to +10 VDC outputs all standard
  • Accepts remote inputs from a PLC or remotely mounted push buttons to adjust the tension setpoint or change the operating setup
  • Can be used to control magnetic particle and pneumatic clutches and brakes, or AC and DC drives

VERSATEC models available in these following three modes:

  • Dancer Control Mode
  • Free Loop Control Mode
  • Ranger Control Mode

Spyder Plus

 Compact, cost-effective tension control for unwind, rewind, point-to-point or dancer applications

D
esigned for precise closed loop tension control, the Spyder is capable of controlling web tension in unwind, rewind, point-to-point or dancer applications. It measures tension from one or more MAGPOWR load cells and outputs a corrective analog signal to control a torque device. Its reduced
size means it can be hidden away in an enclosure or underneath the machine.

With its ethernet connection, the Spyder can be viewed on a web browser for remote troubleshooting, programming and/or data collection. Additionally, the Spyder provides an analog input for Manual Level setpoint, control inputs for Run/Stop, Auto/Manual: Tension On/Off, and E-Stop, and a 0-1 mADC meter output proportional to measured tension.The Spyder is a cost effective, easy-to-use control capable of delivering advanced features such as adjustable taper tension to nearly any application.

Features:

  • Powerful tension control at an affordable price used to control clutches and brakes, or interface directly with a drive
  • Troubleshooting and parameter access via a web browser, html file format
  • Adjustable taper tension
  • User-friendly keypad and display
  • Versatile control for unwind, rewind, point-to-point or dancer
    applications
DFC-90 & DFC-A Dancer/Follower Arm Controls
 
Low-cost tension control for Dancer or Follower Arm applications
Dancer or Follower Arm? You'll find both operating modes applicable for the DFC-90 and DFC-A low cost tension controls.

Dancer Mode:
In dancer control applications, the DFC-90 and DFC-A are full PID closed loop dancer controls. They control web tension by sensing the position of the dancer arm through a DFP or DFP-2 Position Sensor and adjusting the clutch, brake or motor control torque accordingly to maintain the dancer position set point. An advanced control algorithm provides optimum control and ease of use.

Follower Arm Mode:
In follower arm applications, the DFC-90 and DFC-A control web tension by compensating for measured changes in the roll diameter. Roll diameter changes are measured through the DFP or DFP-2 Position Sensor and a follower arm. An optional Stop Multiplier provides additional stopping torque to help stop large unwind rolls.

Make quick setup adjustments using the easily accessible potentiometers. All adjustments are intuitive and clearly marked. 

Features:
  • DFC-90: Current regulate 90 VDC output in four selectable ranges
  • DFC-A: Switch selectable 0 to 10 VDC or 4 to 20 ma output
  • Compact enclosure requires minimal space
  • Simplicity of DIN rail mounting
  • CE and UL requirements for safety and electrical noise immunity
Applications:
DFC-90: Dancer or Follower Arm Control of a magnetic particle clutch or brake
DFC-A: Dancer or Follower Arm Control of a pneumatic brake, clutch or motor drive
FAD Follower Arm/Dancer
 Low-cost tension control for Dancer or Follower Arm applications
Simple, affordable closed loop follower arm/dancer control is right here. The FAD is a low cost printed circuit board designed for Follower Arm and Dancer control applications when using components such as a MAGPOWR DFP position sensor and a MAGPOWR magnetic particle clutch or brake. Simple potentiometer adjustments are available for dancer Position, Gain and Stability; and for follower arm Core, Full Roll and Stop Multiplier. This unit also includes reverse current circuitry as a standard feature, thus allowing greater controllability in the lowest torque range of the clutch or brake being operated.
The FAD Follower Arm/Dancer control accurately controls web tension by compensating for measured changes in roll diameter. In dancer applications when used with the MAGPOWR DFP position sensor and a MAGPOWR magnetic particle clutch or brake, the FAD provides closed loop tension control, maintaining the proper tension in response to dancer roll movement.
Key Features:
  • Can be used as a Dancer or Follower Arm control with a magnetic particle clutch or brake
  • Non-interactive full roll and core adjustments for easy set up
  • 90 VDC output in three selectable current ranges
  • Follower Arm control accepts a remote tension level pot
  • Stop Multiplier for inertia compensation in Follower Arm applications
  • Dancer control accepts a remote position pot
  • Remote dancer position pot (Dancer mode) are provided
  • Includes terminal strip connections for a remote tension pot (Follower Arm model)
Specifications:
  • External Tension Adjust Pot:
    10 Ωohm
  • Remote Position Pot:
    10 Ωohm
  • Temperature Range :
    0 to 40 degrees Celsius operating -30 to 65 degrees Celsius storage

MAGPOWR Cygnus Tension Control

MAGPOWR Cygnus Tension Control A variety of advanced yet easy-to-use features are... (more)

view